Steel Wheel

1. Tires
- For safety reasons, tires should not be replaced individually; replace both on the same axle
- Tires with the deeper tread depth should always be mounted on the front wheels
- Use of tires from the same manufacturer, of the same model and size for all 4 wheels, is recommended
2. Valve
- Always replace when replacing wheel or tire
- Use only valve specified by the manufacturer
3. Steel wheel
- 6J x15, ET 37
4. Wheel bolt
- 14 x 1.5 x 27.5 mm
- Tighten to: 110 Nm (81 ft lb)
5. Lock cylinder
- Install on wheel bolt and lock
6. Cap
- Install over lock cylinder
7. Wheel cover
- Install so that larger opening (with tire valve symbol on back side) is over valve, then press onto wheel and make sure it is securely mounted.
8. Retaining spring
- For balance weight
9. Balance weight
- Maximum permitted per wheel: 60 g (2 oz.)