Programming and Relearning
NOTE: When supplied as repair parts, replacement airbag control modules are not coded.
- If the airbag control module is not coded, the airbag MIL stays on continuously.
- When the On Board Diagnostic (OBD) program is initiated and the VAG1551 scan tool displays incorrect coding for the current airbag system version, or the airbag control module is replaced, code the airbag control module as described.
- Connect scan tool VAG1551 and select "Rapid data transfer" operating model.
Indicated on display
Rapid data transfer HELP
Insert address word XX
- Press buttons -1- and -5- to insert "Airbag" address word 15.
- Press -Q- button to confirm input.
Indicated on display (example)
8A0 959 655 B Airbag III Audi D00 ->
Coding 00127 06812
- Press -> button to advance through program sequence.
Indicated on display
Rapid data transfer HELP
Select function XX
- Press buttons -0- and -7- to select "Code Control Module" function 07.
Indicated on display
Rapid data transfer Q
07 - Code Control Module
- Press -Q- button to confirm input.
Indicated on display
Code Control Module
Enter code number XXXXX 06812
- Enter coding for airbag control module.
Airbag control module coding, USA/Canada
Airbag System version Code
generation
"Airbag III" Driver's and passenger-side active 00127
"Airbag V" Both belt tensioners active
Indicated on display
Coding control module Q
Enter code number 00127 06812
- Press -Q- button to confirm input.
Indicated on display (example)
8A0 959 655 B Airbag III Audi D00 ->
Coding 00127 06812
- Press -> button.
Indicated on display
Rapid data transfer HELP
Select function XX
- Press buttons -0- and -6- to select "End Output" function 06.
Indicated on display
Rapid data transfer Q
06-End Output
- Press -Q- button to confirm input.
The scan tool returns to the basic function and coding is complete.
Indicated on display
Rapid data transfer HELP
Insert address word XX
- Completely remove key from ignition switch.
- Repeat procedure (to verify that control module has been coded correctly).
- Road test.
- Recheck airbag system to make sure that airbag MIL does not come on, and that there are no malfunctions recognized.