Seat Temperature Switch: Service and Repair

Removing/Installing
- Electrically heated seat does not have a separate Control Module.





- Removing: insert a small screwdriver or flat plastic tool as shown, press against the opposite side of the control switch and pry off the front of the switch.
- If necessary, mask off front panel of radio and area above switches.





- Pull switch toward the front with standard or flat-nose pliers.
- Pry off or pull out connector.
- Installing: before installing the control switch, press the front of the switch onto the body of the switch so that it engages audibly.
- Locate connector and press switch in to the stop.