Leak Detection Circuit, Schematic Diagram

1 - Throttle actuator control module -J338
2 - EVAP canister purge regulator valve -N80
- Location: in engine compartment
- Checking
3 - Bleed line
- From EVAP canister to EVAP canister purge regulator valve -N80
Location
- On right side under floor pan
- Vehicles with front-wheel drive: mounted on floor pan in area of fuel tank
- Vehicles with all-wheel drive: mounted on fuel tank
4 - Bleed line
- To gravity valve on fuel tank
5 - EVAP canister
- Location: in bottom of spare tire well
6 - Connecting hose
- LDP/EVAP canister
- Pressure side
7 - Air filter
- For LDP
8 - LDP -V144
- Location: in left rear wheel house behind wheel well.
9 - Vacuum hose
- LDP/throttle actuator control module
10 - T-piece
- Location See Fig. 1

Fig. 1 T-piece Location







The T-piece -arrow- is located between the engine and firewall.
1 - To the EVAP canister
2 - to LDP -V144