Testing Delivery

TESTING DELIVERY


Special tools, test equipment and auxiliary items
^ VAG 1402
^ VAG140213 adapter
^ 3094 hose clamps

- Pinch off suction and return lines using 3094 hose clamps.
- Disconnect pressure line from power steering pump.
- Screw VAG11402/3 adapter into power steering pump in place ,of banjo bolt.
- Close pressure gauge shutoff valve (lever set to left).
- Remove 3094 hose clamps.
- Start engine and top off fluid in reservoir (if necessary).
- Measure pressure reading at idle speed:
^ Do not measure for longer than 10 seconds
^ Specified value: 110 - 120 bar (1595 - 1740 psi)

If specified value is not attained: - Replace power steering pump.
- Check hydraulic fluid level.
- Check steering system for leaks.
- Bleed steering system.