"From cw 15, 1997"

Backrest Panel, (from cw 15,1997 on), Removing And Installing

NOTE:
- Identification: the seat cover and the backrest panel extend completely to the bottom of the seat (different version).
- Backrest panel cannot be pried off using a screwdriver.
- If you install special tool 3370 at the indicated position and clips are not there, then the backrest panel from calendar week 10 to 15 is installed.

Special tools and equipment







3370 special tool







1 - Backrest panel
- Pull backrest panel - 1 - slightly away from seat and insert special tool 3370 - 2 - behind backrest panel.
- Hooks - 3 - are located approx. 95 mm from backrest panel - 1 - outer edge measured inward (dimension - A -).
- By moving special tool 3370 front end off sideways, find center of hooks - 3 - between ribs - 4 -.
- Press special tool 3370 forcefully in direction of arrow until catches release without pulling backrest panel away from seat.
2 - Special tool 3370
3 - Retaining clip (2x)
4 - Ribs