Oil Pump, Cylinder Block Breather and Oil Spray Jets

Oil pump, cylinder block breather and oil spray jets
- Vehicles up to VIN 8D-W-005 000
Oil pan, oil filter, oil cooler, removing and installing. Refer to Oil pan, oil filter and oil cooler.





1. Oil pump
- Removing and installing
- Replace as complete part only
2. Spray jet valve
- 40 Nm (30 ft. lbs.)
3. O-ring
- Always replace
4. Bolt
- 45 Nm (33 ft. lbs.)
5. Idler roller
6. Bolt
- 10 Nm (7 ft. lbs.)
7. Bolt
- 10 Nm (7 ft. lbs.)
8. Breather housing
9. Gasket/breather plate
- Always replace
10. Oil check valve
- 25 Nm (18 ft. lbs.)
11. Connector
12. Bolt
- 15 Nm (11 ft. lbs.)
13. Oil distribution line
- For oil spray jets for piston cooling
14. Cylinder block
15. Bolt
- 10 Nm (7 ft. lbs.)
- Use locking fluid D 000 600 A2 when installing
16. Oil spray jet
- For piston cooling
17. Gasket
- Metal gasket
- Always replace
18. Engine oil temperature sensor -G8-
- 10 Nm (7 ft. lbs.)
- For oil temperature gauge
- White
- If seal is leaking, cut open seal and replace
19. Oil seal
- Replacing. Refer to Cylinder head oil seals, replacing.
20. Tensioner
- Compress and secure before removing. Refer to Toothed belt, removing and installing.
21. Bolt
- 10 Nm (7 ft. lbs.)
- Use locking fluid D 000 600 A2 when installing
22. O-ring
23. Washer
24. Bearing bushing
25. Bolt
- 25 Nm (18 ft. lbs.)
26. Tensioning lever