Airbag Label - Apply After Replacing Windshield

Group: 64

Number: 98-02

Date: Feb. 6, 1998

File this Technical Bulletin in Repair Manual No: W42 014 195 108

Subject: Airbag Label for Replacement Windshield

Model(s): A4 m.y. 1996 ->

Windshield, removing and installing

CAUTION!
On replacement windshields, an airbag label must be installed on the passenger side.

Airbag label, applying

- Using felt tip pen, mark outline of airbag label on outside of windshield according to specified dimensions.

^ Dimension -a-: 12 mm * 1 mm (approx. 15/32 in. * 1/32 in.)

^ Dimension -b-: 12 mm * 1 mm (approx. 15/32 in. * 1/32 in.)

^ Dimension -c-: 15 mm * 1 mm (approx. 19/32 in. * 1/32 in.)





- Remove protective film and apply airbag label on passenger side as shown free of bubbles.

- Remove marking from outside of windshield.

This Repair Manual information is new and will be integrated with the next Repair Manual update.