Reverse Idler Gear, Removing and Installing

Reverse Idler Gear, Removing and Installing






1. Circlip
2. Brace
3. Reverse idler gear
- Different versions, allocation Fig. 24 Allocation of Operating Sleeve to Reverse Idler Gear
4. Needle bearing
5. Thrust washer
6. Transmission - cover
- With reverse idler gear shaft (arrow)
- To remove reverse idler gear it is not necessary to remove reverse idler gear shaft
- Reverse idler gear shaft is not available as a replacement part
- Coat sealing surfaces with a thin layer of sealant AMV 188 001 02
7. Torx bolt
- 35 Nm (26 ft. lbs.)
- Serves as additional method of securing reverse idler gear shaft