Skid Plate: Service and Repair

Noise Insulation Panel, Assembly Overview







1 - Quick-release screw
- 2 Nm (18 in.lb)
- Qty: 3
- To move lock carrier to service position, unscrew only these quick-release screws.
2 - Front noise insulation panel
3 - Quick-release screw
- 2 Nm (18 in.lb)
- Qty: 3
- If rear noise insulation panel - 4 - is installed, use longer quick-release screws.
4 - Rear noise insulation panel
- Only installed with certain engine versions
5 - Quick-release screw
- 2 Nm (18 in.lb)
- Qty: 2







6 - Noise insulation panel mount
- Marking (recess) must face toward left-side of vehicle
7 - Bolt
- Qty: 2
8 - Speed nut
- Qty: 2
9 - Speed nut
- Qty: 3
10 - Clamping pin
- Qty: 4
11 - Wheelhousing liner
12 - Bumper
13 - Lock carrier with attachments.