With Release Button

- Remove head restraint.

Removing
- Using screwdriver, pry fastening strip -2- from guide channel
- Using screwdriver, pull cover over release button -3-.





- Remove head restraint mount -1- from cover -2- together with padding beginning with side opposite release button -3-.
- Remove padding -2- from cover -3-.


Installing
- Install padding -2- into cover -3- and make sure it is correctly aligned.





- Pull padding -2- together with cover -3- over head restraint mount -1- beginning on side with release button.
- Press fastening strips firmly into guide channel (pull to check).