Front Brake Caliper

1. Caps
^ Insert in mounting bushing
2. Guide pin
^ 25 Nm (18 ft. lbs.)
3. Bleeder screw Apply thin coat of brake cylinder paste to threads before screwing in
4. Dust cap
^ Push onto bleeder screw
5. Brake caliper housing
6. Retaining spring
^ Install with both ends in holes in brake caliper housing
7. Mounting bushing
^ Install in brake caliper housing
8. Brake carrier
^ Install on brake caliper housing
9. Seal
10. Piston
^ Apply light coat of brake cylinder paste to piston before installing
^ Diameter: 57 mm (2.244 inch)
11. Protective seal
^ Do not damage when installing piston