With Manufacturer Scan Tool

Erase DTC Memory (Scan Tool Function 05)

Instrument cluster


NOTE: After erasing DTC memory its contents will automatically be emptied. If DTC memory cannot be erased, check DTC memory again and repair malfunctions.


Requirements
- DTC memory checked.
- All malfunctions repaired

After DTC memory has been successfully checked:

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -5- to select "Erase DTC Memory" function 05.

Indicated on display


Rapid data transfer Q
05 - Erase DTC Memory


- Press -Q- button to confirm input.

Indicated on display


Rapid data transfer ->
DTC Memory is erased!


DTC memory is now erased.

- Press -> button.

Indicated on display


Rapid data transfer HELP
Select function XX


This message indicates an error in the test sequence.

Rapid data transfer ->
DTC Memory is not interrogated


NOTE: Follow the specified test sequence exactly. First check DTC memory, repair malfunctions if necessary, then erase DTC memory.