Control Module /Power Seat Memory/Remove/Installing

Located under Driver's seat.

- Remove driver's seat (see Repair Manual A6 Body- Interior W42 018 197110) beginning page 72-6.

- Remove inner seat side trim see page 72-12.





- Disconnect harness connectors -4- and -5-.

- Remove bolt -2-.

Tightening torque: 1.5 Nm (13 in. lb).

- Using a screwdriver, push clip -3- in direction of arrow.

- Remove control module for power seat memory -1-.

- Install (new control module) and seat in reverse order of removal.

- After installing new control module, seat memory basic settings must be set using the VAG 1551 Scan Tool.