Learning Position of Seatback, Mechanical Check

- Put seatback fully rearward manually.





- Press memory button -arrow- and one memory location (e.g. P1, P2, P3).

- Manually adjust seatback forward 90°.

- Press memory location button once again with driver's door open.

The seatback must move back to the stop position (the seat will not move all the way back, so that there is adequate rear passenger leg room).

Note:
Customer should be advised that individual comfort positions must be reprogrammed into seat memory.

When procedure applies to vehicles within the New Vehicle Limited Warranty, use the following:

Part Identifier: 7210
Labor Operation: 7210710 85 TU