Cup Holder and Cup Holder Trim Panel, Removing

Cup Holder And Cup Holder Trim Panel, Removing

- Remove rear seat bench.

Removing cup holder trim panel.







- Using a screwdriver, pry out cup holder trim panel - 4 - at retainer hooks - 3 -.

Removing cup holder
- Cup holder trim panel removed.

- Open cup holder.
- Using a screwdriver, press retainer tabs - 2 - (2x) upward (do not press downward with screwdriver; risk of damaging cup holder) and pull out cup holder - 1 -.

NOTE: The cup holder frame is molded into the rear seat bench and is not available separately as a replacement part.