Head Restraint (With Release Button) Cover and Padding, Removing and Installing

Head Restraint (With Release Button) Cover And Padding, Removing And Installing







- Remove head restraint.
- Outer and center head restraints are the same.

Removing
- Using a screwdriver, pry out fastening strip - 2 - by disengaging it from guide channel - 1 -.
- Using a screwdriver, lift cover fabric over trim plate for release button - 3 -.







- Remove head restraint mount - 1 - from padding/cover - 2 -, starting on the side opposite release button - 3 -.
- Remove padding - 2 - from cover - 3 -.

Installing
- Insert padding - 2 - in cover - 3 -, making sure it is correctly aligned.







- Push head restraint mount - 1 - into padding/cover - 2 -, starting on the side with the release button.
- Press fastening strips firmly into guide channel (pull to check).