Programming and Relearning

Code Control Module (Scan Tool Function 07)

Automatic vertical headlight aim control system


NOTE: "Code Control Module" function 07 is used to program the automatic vertical headlight aim control system control module for:
- Vehicle type
- Drive layout


During coding, option combination possibilities are set.


Initiating coding

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -7- to select "Code Control Module" function 07.
- Press -Q- button to confirm input.

Indicated on display


Code Control Module Q
Input code number XXXXX (0-32000)


- Input code number as shown in code table.

Example: 00005

Indicated on display


Code Control Module Q
Input code number 00005 (0-32000)


- Press -Q- button to confirm input.

Indicated on display


4B0907357 Vertical Aim Control D00 ->
Coding 00005 WSC 06812


- Press -> button to complete coding.

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -6- to select "End Output" function 06.

Indicated on display


Rapid data transfer Q
06 - End Output


- Press -Q- button to confirm input.

Code table

Code Vehicle type/drive layout
0003 A4 sedan/wagon front-wheel drive
0004 A4/S4 sedan/wagon all-wheel drive
0005 A6 sedan/wagon front-wheel drive
0006 A6/S6 sedan/wagon all-wheel drive
0007 A8 front-wheel drive
0008 A8/S8 all-wheel drive