Tires: Service and Repair

Adaptation (Function 10)

The navigation system uses the speed signal from speedometer (GALA) for calculating mileage.

Using the adaptation function, the following changes can be made and saved.
- Changing tire size
- Changing pulse number per wheel rotation (GALA)
- Locking i.e. switching free production diagnostic
- Connection of own i.e. external speakers
- Changing country selection

Individual functions are called up by entering the appropriate adaptation channel numbers (listed in the adaptation table).

Adaptation table:







Initiating "Adaptation" function 10

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -1- and -0-. This selects "Adaptation", function 10.

Indicated on display:


Rapid data transfer Q
10 Adaptation


- Press -Q- button to confirm input.

Indicated on display:


Adaptation
Insert channel number XX


- Enter desired adaptation channel (adaptation table).
- Press -Q- button to confirm input.


Note: After changing an adaptation value or ending an adaptation channel, "Adaptation" function 10 must be performed again before selecting another adaptation channel.


Adapt tire circumference

Indicated on display


Adaptation
Insert channel number XX


- Press buttons -0- and -1-. 1 selects "channel 1"


NOTE: An erroneous entry can be corrected by pressing button -C-.


- Press -Q- button to confirm input.

Indicated on display


Channel 1 Adaptation 1935 ->
<-1 3->


The selected channel and the currently stored tire circumference in mm will be displayed in the line listed above.

- Press -> button.

Indicated on display


Channel 1 Adaptation 1935 ->
Insert adaptation value XXXXX


- Enter new tire circumference, fill initial space with a zero to input the four digit value (e.g. 01910) Tire table.
- Press -Q- button to confirm input.

Indicated on display


Channel 1 Adaptation 1910 Q
<-1 3->


- Press -Q- button to confirm input.

Indicated on display


Channel 1 Adaptation 1910 Q
Store changed value?


- Press -Q- button to confirm input.

Indicated on display


Channel 1 Adaptation 1910 ->
Changed value is stored


- Press -> button.

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -6-. This selects "End Output", function 06.
- Press -> button.