Scan Tool Testing and Procedures

Select functions
The setting-up communication has been set up. You have checked the control module version and pressed the button.





Display: (Select function, e.g. 02 - Check DTC Memory)
You can now select one of the functions in this menu. Start troubleshooting using Function 02, "Check DTC Memory"
01 - Check Control Module Versions
02 - Check DTC Memory
03 - Output Diagnostic Test Mode
04 - Basic Setting
05 - Erase DTC Memory
06 - End Output
07 - Code Control Module
08 - Read Measuring Value Block
10 - Adaptation
11 - Login-Procedure

How to perform the functions "Erase DTC memory" and End output".
Read the relevant topic sections in this workshop manual to find out how to use the other functions.
Press the button if a function has been entirely completed and you want to restore the troubleshooting function to the "Select function" starting point.