With Manufacturers Scan Tool

Erase DTC Memory (Function 05)

Requirements:
- DTC memory checked. Refer to "DTC Memory Checking and Erasing/Displaying and Reading Trouble Codes/" under "Body and Frame/Locks/Power Locks", Testing and Inspection

Indicated on display:


Rapid data transfer HELP
Select function XX


- Enter "05" for "Erase DTC Memory" function and confirm entry with Q key.

Indicated on display:


Rapid data transfer ->
DTC memory is erased!


- Press -> key.

Indicated on display (function selection):


Rapid data transfer HELP
Select function XX


NOTE:
Indicated on display:


Attention!
DTC memory was not interrogated

or


Rapid data transfer
DTC memory was not interrogated


Sequence of operations was not carried out properly.
- Check DTC Memory:
- Repair malfunction, if necessary, then Check DTC Memory.

End Output (Function 06)

Indicated on display:


Rapid data transfer HELP
Select function XX


- Enter "06" for "End of output" function and confirm entry with Q key.

Indicated on display:


Rapid data transfer HELP
Enter address word XX


- Detach diagnostic connectors.