Front Fender Liner: Service and Repair

Front Wheelhousing Liner, Removing And Installing







1 - Wheelhousing liner, front piece
Removing:
- To remove, first remove wheelhousing liner front piece completely.
- Remove cap nuts - 3 -, push through pin of expanding rivet - 4 -, remove expanding rivet and remove front piece.

2 - Wheelhousing liner, rear piece
Removing:
- Remove front piece before removing rear piece.
- Remove cap nuts - 3 -, screws - 5 - and bolt - 8 -, and remove rear piece.
3 - Cap nut
- 1 Nm (9 in.lb.)
4 - Expanding rivet
- Push pin through and pull out expanding rivet.
5 - Screw and washer
6 - Expanding nut







7 - Washer
8 - Bolt
9 - Carrier
- For front wheelhousing liner
- To remove, remove screw with washer - 10 -.
10 - Screw with washer