Electric Mirror Adjusting Unit, Replacing

Electric Mirror Adjusting Unit, Replacing

NOTE: On vehicles equipped with mirror memory, electric adjusting unit cannot be replaced individually.

- Switch ignition off.
- Remove mirror lens.







- Remove screws - 1 - (3x).
Tightening torque: 1 Nm (9 in.lb.)
- Remove electric adjusting unit - 2 -.







- Remove cover - 1 - from electric adjusting unit - 2 -.







- Cut through electrical wiring close to soldered connections (arrows).

Adjusting unit replacement parts:







1 - Adjusting unit
2 - Harness connectors
3 - Harness connector housing







- Attach electrical wires to plug housing included with replacement parts.
- Harness connector wire 1: red
- Harness connector wire 2: brown/white
- Harness connector wire 3: white

NOTE: Arrow points to chamfer on harness connector housing.