Power Components In Seat Frame, Removing and Installing

Power Components In Seat Frame, Removing And Installing

- Removing seat cover and seat cushion.







1 - Length adjustment sensor for driver seat - F83 -
- Installed only in driver seat
2 - Driver's seat fore/aft adjusting motor - V28 - and passenger seat fore/aft adjusting motor - V31 -.
- For faulty motor, remove seat and move forward and backward mechanically.







3 - Power supply for seat adjustment - J137 -
- Shown removed
- Component location: under plate for control module (arrow)
4 - Control module for seat adjustment with memory - J136 -
- Installed only in driver seat
- Connector colors are stamped into connector fields of control module







5 - Sensor for front height adjuster driver seat - F84 -
- Installed only in driver seat
6 - Switch unit on driver seat
- Switch for length adjustment - E61 -
- Switch for front height adjuster - E62 -
- Switch for rear height adjuster - E63 -
- Switch for seatback adjustment - E96 -
- Switch for headrest adjustment - E167 -







6 - Switch unit on passenger side
- Switch for length adjustment - E61 -
- Switch for front height adjuster - E65 -
- Switch for rear height adjuster - E66 -
- Switch for seatback adjustment - E98 -
- Switch for headrest adjustment - E170 -
7 - Operating unit for memory - E97 -







8 - Motor for front height adjuster driver seat - V29 - and motor for front height adjuster passenger seat - V32 -
9 - Motor for rear height adjuster driver seat - V30 - and motor for rear height adjuster passenger seat - V33 -
10 - Sensor for rear height adjuster driver seat - F85 -
- Installed only in driver seat