Erasing DTC Memory (Function 05)

NOTE: DTC memory can be erased only after it has been checked. If DTC memory cannot be erased, again check DTC memory and repair any malfunctions. Check DTC Memory (Function 02)


Requirements
- DTC memory checked
- All malfunctions repaired

When DTC memory has been checked:

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -5- to select "Erase DTC Memory" function 05.

Indicated on display


Rapid data transfer Q
05 - Erase DTC Memory


- Press -Q- button to confirm input. Indicated on display


Rapid data transfer ->
DTC Memory is erased!


DTC memory is now erased.
- Press -> button.

Indicated on display


Rapid data transfer HELP
Select function XX


NOTES:
- This message indicates an error in the test sequence.


Attention! ->
DTC Memory is not interrogated


- This message indicates an error in the test sequence.
- Adhere exactly to the test sequence: first check DTC memory, repair malfunctions as necessary, then erase DTC memory


Rapid data transfer ->
DTC Memory is not interrogated