Track 43-56

Brake Light Switch, Selector Lever Light Relay, Back-Up Light - Track 43-56:

COMPONENTS
F - Brake Light Switch
S3 - Fuse
S7 - Fuse
S9 - Fuse
J218 - Instrument Cluster Combination Processor
M16 - Left Back-Up Light
E1 - Light switch
J267 - Mirror Memory Control Module
J201 - Protection Diode
M17 - Right Back-Up Light
J307 - Selector Lever Light Relay
C1 - Voltage Regulator (VR)


CONNECTORS
T2ad - Double Connector, black, near generator (GEN)
T6b - 6-Pin Connector, gray, connector station wheel house right
T6f - 6-Pin Connector, black, on instrument cluster
T10 - 10-Pin Connector, blue, connector station electronic box plenum chamber
T14 - 14-Pin Connector, violet, behind steering column switch cover


GROUND CONNECTIONS


NOTE: Grounds connections are indicated on the diagram by a numeric code inside a circle


98 - Ground connection, in rear lid wiring harness


HARNESS SPLICES


NOTE: Harness splices are points inside a wiring harness where two or more wires are crimped and/or soldered together. Harness splices are indicated on the diagrams by an alphanumeric code inside a circle


A17 - Wire connection (61), in instrument panel wiring harness
A18 - Wire connection (54), in instrument panel wiring harness
A19 - Wire connection (58d), in instrument panel wiring harness
A37 - Wire connection (58a), in instrument panel wiring harness
A87 - Connector (RF), in instrument panel wiring harness
Q22 - Wire connection -1-, in rear lid wiring harness