Front Center Console, Removing and Installing

Front center console, removing and installing




1 - Screws: 2 Nm (18 in. lb)
2 - Filler piece
3 - Shift lever boot
4 - Screw
5 - Center console

Removing

CAUTION! Before disconnecting the battery, determine the correct coding for the anti-theft radio




- Disconnect battery Ground (GND) strap.
- Remove knobs for climate controls
- Remove trim plate.
- Remove screws - 1 - and filler piece -2- downward.
- Remove shift lever knob.
- Remove screw - 4 - and remove shift lever boot upward.
- Pull center console - 5 - out of guides toward rear.
- Disconnect harness connectors.
- Install in reverse order of removal.