VAG 1551 Scan Tool (ST), Selecting Functions

VAG 1551 Scan Tool (ST), selecting functions
After establishing the data link, checking the control module version, and pressing the -> button:





Indicated on display
You can now select one of the functions listed below. Start the troubleshooting procedure using the "Check DTC Memory" function. Checking DTC Memory (Scan Tools Function 02)

01- Check Control Module Versions
03- Output Diagnostic Test Mode
04- Basic Setting
05- Erase DTC Memory
06- End Output
07- Code Control Module
08- Read Measuring Value Block
09- Read Individual Measuring Value
10- Adaptation
11- Login Procedure

Functions applicable to the ABS system are described in the relevant sections.
- Erasing DTC memory. Erase DTC Memory
- Ending output. End Output

When a function has been completed:
- Press -> button to return to beginning of troubleshooting procedure.





Indicated on display