Track 50-62

Engine Control Module - Track 50-62:

COMPONENTS
J104 - ABS Control Module (w/EDL)
G61 - Knock Sensor (KS) 1
G66 - Knock Sensor (KS) 2
J192 - MFI Engine Control Module (ECM)
G172 - Sensor for EVAP Canister

CONNECTORS
T3n - Wire Connector, 3 Point, green, on Knock Sensor (KS) II
T3o - Wire Connector, 3 Point, blue, on Knock Sensor (KS) I
T3as - Wire Connector, 3 Point, violet, behind Instrument panel, Left
T3at - Wire Connector, 3 Point, black, in engine compartment, right
T10c - Wire Connector, 10 Point, green, connector station in auxiliary relay panel
T10d - Wire Connector, 10 Point, blue, connector station in auxiliary relay panel

GROUND CONNECTIONS

NOTE: Grounds connections are indicated on the diagram by a numeric code inside a circle

83 - Ground connection -1-, in right front wiring harness
84 - Ground connection, engine block, in right front wiring harness
200 - Ground connection (shielding), in engine compartment wiring harness

HARNESS SPLICES

NOTE: Harness splices are points inside a wiring harness where two or more wires are crimped and/or soldered together. Harness splices are indicated on the diagrams by an alphanumeric code inside a circle

D10 - Plus connection (30), in right front wiring harness
D116 - Wire connection -14-, in engine compartment wiring harness