Track 86-96

Engine Control Module - Track 86-96:

COMPONENTS
Z29 - Heater for Lambda-probe 1
Z30 - Heater for Lambda-probe 2
J192 - MFI Engine Control Module (ECM)
G130 - Oxygen Sensor (02S) Behind Three Catalytic Converter (TWC)
G131 - Oxygen Sensor (02S) 2 Behind Three Catalytic Converter (TWC)

CONNECTORS
T4aa - Wire Connector, 4 Point, green, in engine compartment, left
T4ab - Wire Connector, 4 Point, brown, in engine compartment, left

GROUND CONNECTIONS

NOTE: Grounds connections are indicated on the diagram by a numeric code inside a circle

84 - Ground connection, engine block, in right front wiring harness
200 - Ground connection (shielding), in engine compartment wiring harness

HARNESS SPLICES

NOTE: Harness splices are points inside a wiring harness where two or more wires are crimped and/or soldered together. Harness splices are indicated on the diagrams by an alphanumeric code inside a circle

D119 - Wire connection -17-, in engine compartment wiring harness