Evaporative Emissions System: Diagrams

1 Fuel system leak detection pump -V1440-.
- In right rear wheelhousing under liner.
2 Connecting line.
- Between upper and lower cavities of leak detection pump.
3 3-pin connector.
4 Air filter.
- For leak detection pump.
5 Connecting line.
- From leak detection pump to EVAP canister.
- 12 mm (0.47 in).
6 Fuel tank.
7 EVAP canister purge solenoid valve -N115-.
- With ignition switched off, valve is closed.
- With ignition switched on, valve is always open.
- Valve opens at 40 mbar pressure in fuel tank.
8 Connecting line.
- From fuel tank to EVAP canister.
- 9 mm (0.35 in) diamete.
9 Connecting line.
- From EVAP canister purge regulator valve -N80-.
- 12 mm (0.47 in).
10 EVAP canister purge regulator valve -N80-.
11 EVAP canister.
- On floor in spare tire well under cover.
12 Harness connector.
- For EVAP canister purge solenoid valve -N115-.
13 Vacuum line to engine.