System Layout

IMAGE REFERENCE:
1 Engine Control Module (ECM) -J192-
2 ECM signal wires
- 4-pin, light-brown
3 Power output stage -N122-
- For ignition coils
4 Ignition coil primary connections
- 3-pin, dark brown
5 Harness connection
- 3-pin
- For Knock Sensor (KS) 2 -G66-
6 Camshaft Position (CMP) sensor -G40-
7 Engine speed (RPM) sensor -G28-
8 Crankshaft Position (CKP) sensor -G4-
9 Knock Sensor (KS) 2 -G66-
10 Ignition coils 1, 2 and 3; -N-, -N128- and -N158-
11 Knock Sensor (KS) 1 -G61-
12 Spark plug connector
13 Harness connector
- 3-pin, gray
- For engine speed (RPM) sensor -G28-
14 Harness connector
- 3-pin, black
- For Crankshaft Position (CKP) sensor -G4-
15 Harness connector
- 3-pin
- For Knock Sensor (KS) 1 -G61-
16 Harness connector
- 3-pin, white, voltage supply
- For ignition coils 1, 2 and 3, -N-,-N128- and -N158-
17 To fuse for ignition coils
18 ECM connector E
- 12-pin, black
19 ECM connector A
- 24-pin, black
20 ECM connector B
- 24-pin, red
21 ECM connector C
- 24-pin, brown
22 ECM connector D
- 12-pin, brown