Knee Bolster, Passenger-Side

]

Knee Bolster, Passenger-side







1 - Knee bolster, passenger-side

Removing:
- Use screwdriver to lift off cover from side.
- Remove bolts - 2 - (2x).
- Open knee bolster glove compartment.
- Press both hinged arms - 5 - inward with force in direction of arrow - A - until glove compartment - 1 - can be fully lowered in direction of arrow - B -.

- Upper bolt - 3 - is near left hinged arm

- Remove bolts - 3 - (2x).
- Carefully remove rubber lip - 4 - located behind center console - 6 -.

Installing:
- Carefully push rubber lip - 4 - behind cutout in center console - 6 -.
- Install bolts - 3 - and - 2 -.
- Push glove compartment - 1 - in direction of arrow - C - over spring tension of hinged arms.







2 - Bolts (2x)
- 5 Nm (44 in.lb)
3 - Bolts (2x)
- 5 Nm (44 in.lb)
4 - Rubber lip
5 - Hinged arm
6 - Center console, front