With Manufacturer Scan Tool

Erase DTC Memory (Scan Tool Function 05)


NOTE: If the DTC memory cannot be erased, check DTC memory again and repair malfunctions.


Requirements
- DTC memory checked.
- All malfunctions repaired

After DTC memory has been successfully checked:

Indicated on display


Rapid Data Transfer HELP
Select function XX


- Press buttons -0- and -5- to select "Erase DTC Memory" function 05.

Indicated on display


Rapid Data Transfer Q
05 Erase DTC Memory

- Press -Q- button to confirm input

Indicated on display


Rapid Data Transfer ->
DTC Memory is erased


DTC memory is now erased

- Press -> button.

Indicated on display


Rapid Data Transfer HELP
Select function XX


NOTE:
- This message indicates an error in the test sequence:


Attention!
DTC Memory not interrogated


- This message indicates an error in the test sequence:


Rapid Data Transfer ->
DTC Memory not interrogated


- Observe the test sequence exactly: first check DTC memory, if necessary repair malfunctions then erase.