Drive Flange Housing

1. Drive flange
2. Seal
- Prying out
- Driving in
3. Circlip
4. Grooved ball bearing for drive flange
5. Sleeve
6. Washer
- Press out only if damaged
7. Circlip
- Expand to remove drive flange
8. O-ring
- Always replace
9. Bolt
- 35 Nm (26 ft. lbs.)
- For mounting drive flange housing to final drive housing
10. Drive flange housing
11. Bolt
- 40 Nm (30 ft. lbs.)
- For fastening transmission support to drive flange housing
12. Transmission - support
13. Circlip
14. Cap
15. O-ring
- Always replace