"Up to VIN 8D XA 200 000"

Front Fender (> VIN 8D XA 200 000), Assembly Overview







1 - Combination bolt
- 4.5 Nm (40 in.lb)
2 - Threaded rivet
- Threaded rivet is inserted using VAG1618A
3 - Combination bolts (2x)
- 7.5 Nm (66 in.lb)
4 - Phillips head screw
- 4.5 Nm (40 in.lb)
5 - Metal nut (2x)
6 - Fender
- Remove bumper.
- Remove wheelhousing liner.
- Remove end plate Fig. 1.
- Remove headlights.
- Disconnect electrical connectors for side blinkers.

- Remove bolts - 1 -, - 3 -, - 4 -, - 7 -, and - 11 -.







7 - Combination bolt
- 7.5 Nm (66 in.lb)
8 - Bracket
9 - Combination bolt
- 7.5 Nm (66 in.lb)
10 - Metal nut
11 - Combination bolt
- 7.5 Nm (66 in.lb)







Fig. 1 Removing and installing end plate
- Remove front wheel.
- Remove wheelhousing liner.
- Remove bolt - 2 - (2x).
Tightening torque: 2.5 Nm (22 in.lb)
- Remove end plate - 3 - from fender - 4 -.
1 - Expanding clip (2x)