Fuel Distance/Mileage Module: Service and Repair
Adaptation (Scan Tool Function 10)
Function 10 is used to initiate and store the following changes:
- Adaptation of fuel gauge display
- Correction of the fuel consumption display
- Coding of language versions for Auto Check system
- Adaptation of the Service Reminder Indicator (SRI)
- Setting the odometer after instrument cluster replacement.
Individual functions are called up by entering the appropriate adaptation channel number (See adaptation table).
Adaptation table
Adaptation channel Adaptation function
01 Adaptation of fuel gauge display
02 Resetting SRI after service
03 Adaptation of fuel consumption display
04 Language versions of the multi-function display
05 SRI - service interval for oil change (distance in km)
06 SRI - service interval 1 (IN1) distance in km
07 SRI - service interval 1 (IN1) time in days
08 SRI - service interval 2 (IN2) time in days
09 Adapting odometer reading
Initiating "Adaptation" function 10
Indicated on display
Rapid data transfer HELP
Select function XX
- Press buttons -1- and -0- to select "Adaptation" function 10.
Read Measuring Value Block Q
10 - Adaptation
Indicated on display
- Press -Q- button to confirm input.
Indicated on display
Adaptation Q
Insert channel number XX
- Insert desired adaptation channel (See Adaptation table).
- Press -Q- button to confirm input.
NOTE: After changing an adaptation value or after an adaptation in a specific channel has been completed, Adaptation" function 10 must be selected again in order to select another adaptation channel.
Adapting fuel consumption display (direct input method)
Indicated on display
Rapid data transfer HELP
Select function XX
- Press buttons -1- and -0- to select "Adaptation" function 10 and press -Q- button to confirm input.
Indicated on display
Adaptation Q
Insert channel number XX
- Press buttons -0- and -3- to insert channel 03.
- Press -Q- button to confirm input
NOTE:
- The value entered must be between 85% and 775%.
- Input is in steps of 5%.
Indicated on display
Channel 3 Adaptation ->
< -1 3- >
- Press -> button.
NOTE: Correction of the fuel consumption display is only carried out with the direct input method.
Indicated on display
Channel 3 Adaptation 100
Input adaptation value XXXXX
- Input desired correction value using keypad on VAG1551, fill in leading digits with zeroes "0".
Example:
Desired input value: 90%
Keyboard entry: 00090
Indicated on display
Channel 3 Adaptation 100 Q
Input adaptation value 00090
- Press -Q- button to confirm input
Indicated on display
Channel 3 Adaptation Q
Store changed value?
- Press -Q- button to confirm input
Indicated on display
Channel 3 Adaptation 90 ->
Changed value is stored
- Press -> button to end adaptation.
Indicated on display
Rapid data transfer HELP
Insert address word XX
- Press buttons -1- and -0- to select "Adaptation" function 10 and press -Q- button to confirm input.
NOTE: If an incorrect entry is made, the VAG1551 will switch to the following display:
Indicated on display
Function is unknown ->
or cannot be carried out at the moment.
- Press -> button.
- Select "Adaptation" function 10 and adaptation channel 03 again.
- Repeat adaptation of fuel consumption display and press -Q- button to confirm input.