Code Control Module (Function 07)

This function can be used to code the interior monitoring as follows:
- Vehicle type: Audi A4
- Arming mode of anti-theft system: dynamic (m.y. 1997), or static (as of m.y. 1998)
- Body version: Sedan/Avant


NOTE:
- The coding adjusts the control module for ultra-sound sensors -J347- to meet the specific requirements of the particular model version and anti-theft alarm system.
- The coding table gives only the coding applicable to the Audi A4.


Carrying out "Code Control Module" function 07

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -7- to select "Code Control Module" function 07.

Indicated on display


Rapid data transfer Q
07 - Code Control Module


- Press -Q- button to confirm input.

Indicated on display


Code Control Module
Enter code number XXXXX (0-32000)


- Enter code number:

Coding: 00101
00 Place holders, disregard
1 Audi A4
0 Arming mode static
1 Sedan
2 Avant

Indicated on display


Code Control Module Q
Enter code number 00101 (0-32000)


- Press -Q- button to confirm input.

Indicated on display


4B0951173 Interior monitoring D00 ->
Coding 00101 WSC 06812


- End coding by pressing -> button.

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -6- to select "End Output" function 06.
- This will end the function.

Indicated on display


Rapid data transfer Q
06 - End Output


- Press -Q- button to confirm input.