Reading

Read Measuring Value Block (Scan Tool Function 08)

Initiating "Read Measuring Value Block" function 08

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -8- to select "Read Measuring Value Block" function 08.

Indicated on display


Rapid data transfer Q
08 - Read Measuring value block


- Press -Q- button to confirm input

Indicated on display


Read Measuring Value Block HELP
Input display group number XXX


- Input display group number from table and press -Q- button to confirm input.

The scan tool will indicate the selected display group.

Display group overview

Display group Indicated on display
001 1 = Vehicle speed (kmh/MPH)
2 = Engine speed (RPM)
3 = Oil pressure switch 2
002 1 = Odometer (km/ml)
2 = Fuel gauge (liters/gal)
3 = Outside temperature (°C/F)

003 1 = Engine coolant temperature (°C/F)

050 1 = Odometer (km/ml)
2 = Engine speed (RPM)
4 = Engine coolant temperature (°C/F)


NOTE:
- The display will always show the actual values from the sensors. Since the instrument panel displays filters the values, they may differ from the actual values.
- If the actual Engine Coolant Temperature (ECT) is between 80 °C (176 °F) and 700 °C (272 °F), the instrument panel will always display 90 °C (194 °F).
- Additional display groups for the instrument cluster are not possible.