Drive Belt: Diagrams

V-belt and ribbed belt, routing overview




1 - Ribbed belt tensioner
2 - Generator
3 - Viscous clutch
4 - Coolant pump
5 - Power steering pump
6 - V-belt
- For coolant pump
- Removing and installing, V belt, Removing and Installing
7 - Ribbed belt
- For generator, power steering pump and viscous fan
- Removing and installing, Ribbed Belt, Removing and Installing
8 - Vibration damper
9 - Ribbed belt tensioner
- For A/C compressor
10 - Ribbed belt
- For A/C compressor
- Removing and installing, Ribbed Belt For Air Conditioning
11 - A/C compressor




Fig. 1 Viscous fan, removing and installing
- Lock carrier in service position, [1][2]Procedures
- Ribbed belt free of tension, Ribbed Belt, Removing and Installing
- Secure belt pulley for viscous fan with 5 x 60 mm bolt and remove using hex socket wrench.
- Remove viscous fan.
- When installing viscous fan, tighten to 45 Nm (33 ft. lbs.).




Fig. 2 Install vibration damper
- Lock carrier in service position, [1][2]Procedures
- Ribbed belt removed, Ribbed Belt, Removing and Installing
- Install vibration damper using only original equipment bolts (bolt strength grade 10.9) Parts Supplier.
- Installation is only possible in one position: the bore hole of the vibration damper (arrow) must align with raised portion of toothed belt gear.
- Tighten vibration damper bolts to 40 Nm (30 ft. lbs.).