Magnetic Ring Replacement

NOTE: These parts can be replaced with the transmission installed.

REMOVAL
- Disconnect drive axle from flanged shaft on left side.
- Place oil drip tray below flanged shaft.





- Remove flanged shaft and seal -B- for flanged shaft.
Remove drive gear -A- for speedometer by prying alternately with screwdriver at driver studs (arrows -1-)

INSTALLATION
- Flange (arrow -2-) faces the differential housing.
- Driver studs of drive gear then face seal -B- and engage in grooves on differential housing.
- Replace seal -B- and circlip -C- for flanged shaft.
- Top up gear oil.