VAS 5094 Airbag Adapter, Connecting

VAS 5094 Airbag Adapter, Connecting







- Insert harness connector - 2 - (VAS 5094 airbag adapter) into connector housing - 3 -.
- Connect igniter wire - 6 - from airbag module (on seat frame) to harness connector - 1 - (airbag adapter).
- For seats with seat heaters, disconnect harness connector.
- Turn down carpet in area near guide rail.
- Push seat back out of guide rail.
- Lift seat out of vehicle.

WARNING: Leave VAS 5094 airbag adapter on seat until seat is again installed in vehicle.







1 - Airbag adapter-igniter wire harness connector
2 - Airbag adapter-Ground wire harness connector
3 - Ground wire harness connector from airbag module
4 - Airbag adapter-Ground wire harness connector
5 - Airbag adapter-Ground wire harness connector
6 - Airbag module igniter wire harness connector
- From airbag module on seat frame