Read Measuring Value Block (Function 08)

Engine Operating Conditions (engine Electronics), Checking


NOTE: This test checks whether the Motronic Engine Control Module (ECM) -J220- recognizes the engine operating conditions.


Required special tools and test equipment
- VAG1551 or VAG1552 scan tool with VAG1551/3 adapter

Test requirements
- Engine oil temperature at least 80 °C (176 °F)

Checking
- Connect VAG1551 or VAG1552 scan tool and press buttons -0- and -1- to insert "Engine Electronics" address word 01 (with engine running at idle). [1][2]Scan Tool Connecting and Initial Checks

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -8- to select "Read Measuring Value Block" function 08, and press -Q- button to confirm input.

Indicated on display


Read Measuring Value Block HELP
Input display group number XXX


- Press buttons -0-, -0- and -5- to input display group number 5 (005), and press -Q- button to confirm input.

Indicated on display (1-4 = display fields)


Read Measuring Value Block 5 ->
1 2 3 4


- Check engine operating conditions (display field 4):

Display Group 5:

If displayed values are NOT OK (not as specified):
- Check free movement of accelerator pedal and cable.
- Check throttle valve control module. Refer to Throttle Valve Control Module, Checking Testing and Inspection