Clutch hydraulic system, Overview

Clutch hydraulic system, servicing






1. Brake fluid reservoir
2. Supply hose
- For clutch master cylinder
3. Hose/line assembly
- With threaded connections on clutch master cylinder and clutch slave cylinder
4. Line fitting nut
- 15 Nm (11 ft. lbs.)
5. Mounting bracket
6. Clutch pedal
- Removing and installing, Clutch Pedal and Over-Center Spring, Removing and Installing
7. Socket head bolt
- 20 Nm (15 ft. lbs.)
8. Pin and locking plate
9. Clutch master cylinder
- Removing and installing, Service and Repair
10. Transmission
11. Clutch slave cylinder
- Installing, Service and Repair
- After working on hydraulic clutch mechanism, bleed clutch slave cylinder, Clutch System Bleeding
- After working on hydraulic clutch mechanism, bleed clutch slave cylinder.
- Do not press clutch pedal after clutch slave cylinder has been removed
12. Bleeder valve
- Observe all CAUTIONS, WARNINGS, NOTES and procedures when bleeding, Clutch System Bleeding
- 4.5 Nm (40 inch lbs.)
- Observe all CAUTIONS, WARNINGS, Notes and procedures when bleeding, refer to Clutch Fluid, Service and Repair.
13. Bracket
- Mounted to transmission
14. Bolt
- 25 Nm (18ft. lbs.)
15. Nut
- 2 Nm (18 inch lbs.)
16. Seal
17. Seal
- Must not be removed