Clutch Mechanism, Servicing Notes

Notes:

- Determine the correct coding for the antitheft radio (if equipped).

- Switch the ignition off and disconnect battery Ground (GND) strap.

- Lubricate all bearings and contact surfaces with G 052 142 A 2 polycarbamide grease.

- Before working on the pedal cluster, remove the driver's side storage compartment.

- Make sure that no brake fluid escapes into the plenum chamber or onto the transmission below. If this does happen, clean the affected areas thoroughly.

- When working in the floor area, cover the carpet with a cloth to protect against any leaking brake fluid.