Fig. 23 Install Position of Operating Sleeve For 5TH & Reverse

Installation position of operating sleeve for 5th and reverse gear






- Operating sleeves with chamfer -A- (arrow -1-), as well as operating sleeves with a large offset -B- (arrow -3-), are installed.

- Note the location of operating sleeve to reverse idler gear, Fig. 24 Allocation of Operating Sleeve to Reverse Idler Gear

Installation position:

- Chamfer (arrow -1-) faces 4th gear.

- Small stepped side (arrow -2-) faces 5th gear.

- Large stepped side (arrow -3-) faces reverse gear.