Shift Mechanism Fine Adjustment

Shift Mechanism Fine Adjustment, Checking

Fine Adjustment

If shift adjustment is not OK, proceed as follows:






- Loosen nuts for ball housing (arrows -A- and -B-).
- Move shift lever together with ball housing to right toward 5th/reverse gear gate up to stop in transmission and hold in position.
- Press ball housing to left against shift lever.
- Hold shift lever and ball housing in position and tighten ball housing nuts.

- Arrow -A-: 25 Nm (18 ft. lbs.)

- Arrow -B-: 10 Nm (7 ft. lbs.)

- Install covers and shift knob.

Note:

- If only 5th gear and reverse gear cannot be engaged, the 5th and reverse gear lock must be checked and replaced if necessary, Removing and Installing Gear Lock For 5TH and Reverse Gear