Sealing Cap (Core Plug) In Cylinder Head, Installing

Cylinder heads supplied as replacement parts can be used on either the left or right-sides of the engine. A sealing cap (core plug) must be installed in the front end of the cylinder head in each case.
- Coat outside circumference of sealing cap (core plug) with sealant AMV 188 001 02.

CAUTION: Part numbers are listed here for reference only. Always check with your Parts department for the latest information.





- Using VW295 needle bearing drift, drive in sealing cap (core plug) until outside rim is flush with end of chamfer in cylinder head (see inset).