Adaptation (Function 10)
Adaptation (Function 10), Ultrasonic Interior Monitoring
Adaptation can be used to adjust and store the sensitivity level of the ultra-sound sensors.
Carrying out "Adaptation" function 10
Indicated on display
Rapid data transfer HELP
Select function XX
- Press buttons -1- and -0- to select "Adaptation" function 10.
Indicated on display
Rapid data transfer Q
10 - Adaptation
- Press -Q- button to confirm input.
Indicated on display
Adaptation
Insert channel number XX
- Press buttons -0- and -1- to insert channel number 10.
Indicated on display
Adaptation Q
Insert channel number 10
- Press -Q- button to confirm input.
Indicated on display
channel 1 Adaptation 100 ->
Sensitivity in % (-1 3-)
The display will show the sensitivity level of the sensors, e.g. 100%.
NOTE: The maximum sensitivity level for the ultra-sound sensors is 100% (factory setting). This can be reduced to 50%.
- Press -> button.
Indicated on display
Channel 1 Adaptation 100
Input adaptation value XXXXX
- Input sensitivity level (e.g. 75% = 00075)
Indicated on display
Channel 1 Adaptation 100 Q
Input adaptation value 00075
- Press -Q- button to confirm input.
Indicated on display
Channel 1 Adaptation 75 Q
Sensitivity in % (-1 3-)
- Press -Q- button to confirm input.
Indicated on display
Channel 1 Adaptation 75 Q
Store changed value?
- Press -Q- button to confirm input.
Indicated on display
Channel 1 Adaptation 75 ->
Changed value is stored
- Press -> button to end adaptation procedure for sensitivity level.
Indicated on display
Rapid data transfer HELP
Insert address word XX