With Manufacturer Scan Tool

Check DTC Memory (Function 02)


NOTE: Fault information displayed is not updated constantly, but rather only on starting On Board Diagnostic (OBD)/implementing function 05 "Erase DTC Memory".


- Switch on printer by pressing PRINT key (lamp in key lights).

Implementing function "02 - Check DTC Memory"

Indicated on display:


Rapid data transfer HELP
Select function XX


- Press keys 0 and 2.

Indicated on display:


Rapid data transfer Q
02 - Check DTC Memory


- Confirm entry with Q key.

The number of stored faults appears on the display.


X faults detected ->


The stored faults are consecutively displayed and printed out.

- Consult Diagnostic Trouble Code (DTC) table with fault printed out and eliminate fault. Front Passenger Seat Adjustment With Memory Control Module

In the case of "No faults detected", program returns to start after pressing -> key.


No faults detected ->


Indicated on display:


Rapid data transfer HELP
Enter address word XX


If any other display appears:
- Erase DTC Memory (function 05).
- End Output (function 06). Refer to "Driver's Seat Adjustment With Memory Control Module, on Board Diagnostic (OBD)/Clearing Trouble Codes/With Manufacturer Scan Tool/End Output (Function 06)", [1][2]Component Tests and General Diagnostics

- Unplug diagnostic connector.